ad do not scale from this print .285 7.24 ref .505 12.83 ref "a" "a" mmsd-05-22-x-xx.xx-s shown fig 1 ipd1-xx-d (no of pos x .100[2.54]) + .055[1.40] ref .353 8.97 ref .250 6.35 ref .100 2.54 ref 01 10 05 06 (see note 11) xx.xx section "a"-"a" dwlx-02-xxxx-s-xx.xx-xx-xx c mmsdx-xx-xxx-x-xx.xx-x-x-xxx no of positions -02 thru -25 (per row) plating specification -f: flash selective (use c-179-xx-f) -l: light selective (use c-179-xx-l) -s: selective (use c-179-xx-s) wire gauge (awg) pvc: -20, -22, -24, -26, -28, -30 fep : -20,-24-28-30 -m: metal latch (use ipd1-xx-d-x-m) (leave blank for plastic) double -lus: plastic latch up, straight -lds: plastic latch down, straight -lux: plastic latch up, crossed -ldx: plastic latch down, crossed -mus: metal latch up, straight -mds: metal latch down, straight -mux: metal latch up, crossed -mdx: metal latch down, crossed option single specify in inches [use dwc-xx-xx] (single end: 03.00 inch minimum, double end: 03.25 inch minimum) assembled length (-p, -k, or -g option is required.) -p: polarization (see fig 3, sheet 2) (not available with -lus, -lds, -lux, -k, -g options) -k: keyed polarization (use ipd1-xx-d-k) (see fig 4, sheet 2) (not available with -p, -g options) -g: guide post (use ipd1-xx-d-gp) (see fig 6, sheet 3) (not available with -lds, -lux, -p, -k options) (leave blank for no polarization; available to existing customers only) polarization option end option -s: single end -d: double end (must choose from lus, lds, lux, ldx, mus, mds, mux, or mdx) c (see table 3, sheet 3) (leave blank for standard black cable) (not available with fep option) color code fep cable option -t: fep insulation (leave blank for standard pvc insulation) (see note 11) xx.xx fig. 2 mmsd-05-22-x-xx.xx-d shown c dwlx-02-xxxx-d-xx.xx-xx-xx sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: .100[2.54] socket discrete cable assembly by: mmsdx-xx-xxx-x-xx.xx-x-x-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 07/16/2004 3 1 sheet scale: 1:0.666667 housing: nylon 66, color: white contact: phos bronze cable; insulation: see callout wire: tinned copper latch: nickel-plated becu, #25, 1/2 ht f:\dwg\misc\mktg\mmsdx-xx-xxx-x-xx.xx-x-x-xxx-mkt.slddrw notes: 1. represents a critical dimension. 2. burr allowance: .003[.08] max. 3. parts to be molded to position. 4. minimum pin pullout force: 4.000lb[17.79n] 5. contact must be inserted until retention feature locks into place. 6. all finished goods are to be electrical tested including hi-pot test @ 1000 volts dc. after final electrical test, label each assembly with 1 label-et. 7. tinned copper wire is rohs compliant. 8. parts are to be layer packaged. 9. minimum metal latch retention force: 1.000lb[4.45n] 10. refer to crimp specifications print for crimp and strip dimensions, tolerances, and tooling. 11. for lengths less than 12 in, tolerance shall be .125[3.18]. for other lengths, tolerances shall be 2%. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 revision ad
-lus [latch up - cable straight] latch- end 1 latch- end 2 -lds [latch down - cable straight] latch- end 1 latch- end 2 -lux [latch up - cable crossed] latch- end 1 latch- end 2 -ldx [latch down - cable crossed] latch- end 1 latch- end 2 ipd1-xx-d-p 01 02 07 (not available with -lus, -lds, -lux options ) -p: polarization fig 3 (mmsdx-06-xx-x-xx.xx-x-p shown) .022 ref 0.56 fig 4 (mmsdx-06-xx-x-xx.xx-x-k-xxx shown) (not available with -p option) (same as fig. 1, unless otherwise stated) -k: keyed polarization ipd1-xx-d-k -02 pos (different as shown) n n/2 01 n/2 + 1 (see table 2) n/2 + 1 01 n/2 n (see table 2) n/2 + 1 01 n/2 n (see table 2) n n/2 01 n/2 + 1 (see table 2) n/2 + 1 01 n/2 n (see table 2) n n/2 01 n/2 + 1 (see table 2) n/2 n n/2 + 1 01 (see table 2) 01 n/2 + 1 n/2 n (see table 2) ipd1-02-d-k (see sheet 3, table 4 for pin mapping) (see sheet 3, table 4 for pin mapping) (see sheet 3, table 4 for pin mapping) (see sheet 3, table 4 for pin mapping) sheet of .100[2.54] socket discrete cable assembly by: mmsdx-xx-xxx-x-xx.xx-x-x-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 07/16/2004 3 2 sheet scale: 1.25:1 revision ad f:\dwg\misc\mktg\mmsdx-xx-xxx-x-xx.xx-x-x-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
.618 15.70 ref fig 5 (mmsdx-06-xx-x-xx.xx-s-m shown) (same as fig 1, unless other wise stated) ipd1-xx-d-x-r ltc-14-01-n .109 - .002 + .003 2.77 - 0.05 + 0.08 .260 - .005 + .010 6.60 - 0.13 + 0.25 .310 7.87 ref ipd1-xx-d-gp fig 6 (mmsdx-06-xx-x-xx.xx-s-g shown) (not available with -lds, -lux, -p, -k options) (same as fig 1, unless other wise stated) sheet of .100[2.54] socket discrete cable assembly by: mmsdx-xx-xxx-x-xx.xx-x-x-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 07/16/2004 3 3 sheet scale: 2:1 revision ad f:\dwg\misc\mktg\mmsdx-xx-xxx-x-xx.xx-x-x-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
